Menu
Cart 0
3 CFM Vac Pump + 2Gallons Vacuum Chamber Degas Silicone Liquid Expoxy Resin

3 CFM Vac Pump + 2Gallons Vacuum Chamber Degas Silicone Liquid Expoxy Resin

  • 16870


Details
Our heavy duty vacuum chamber is perfect for removing gases from compounds which have become entrapped in the mixture when mixing components. Vacuum chambers are required to assure a bubble-free mold when mixing resin and silicone rubbers and slower setting resins. Our vacuum chamber greatly reduces gas bubbles and pockets that would weaken the epoxy or silicone. Clear lid allows for you to see air being vacuumed out of your resin mix. Built-in valve and gauge provides ease of use and convenience. Glycerin filled industrial gauge resists vibrations and keeps the gauge accurate to within 0.5inHg. This vacuum chamber is perfect for degassing silicone, epoxy resin, solvents and more!
1/3HP 3CFM Single Stage Vacuum Features:
High Efficiency & Low Noise
Heavy-duty Aluminum Alloy Casing
Direct Drive Motor Allowing Easy Starting and is Maintenance Free
Oil Sight Glass for Monitoring Oil Levels
With Oil Drain Plug Positioned at Bottom of Oil Reservoir
Internal High Volume Cooling Fan for Extended Use
Exhaust Port with Exhaust Cap
ON/OFF Switch
Non Slip Cushion Handle
Includes a Bottle of Vacuum Oil ÌøåÀå_FREEÌøåÀå_
Specifications:
Power Voltage 110V, 60Hz
Motor Power 1/3HP, 3 CFM
Pump Speed 1720 RPM
Oil Capacity
200ml
Micro Rating 75 Microns (10pa)
Ultimate Vacuum 0.3Pa (10-6 BAR)
2 Gallons Chamber Features:
Heat cured silicone gasket is chemically resistant to solvents like butane and does not loose vacuum over time
Heavy duty 3/4" shatter resistant acrylic crystal lid allows you to see inside and bulletproof
Hydro-tested stainless steel container is high strength, very durable and withstands up to 160ÌøåÀå_F
Glycerin filled industrial gauge resists vibrations and keeps the gauge accurate to within 0.5inHg.
5 foot collapse-proof steel wire reinforced hose easily withstands any vacuum pressure you throw at it and features
Both the release valve and ball valve are built into a single unit for ease of use
Durable brass fittings fit all vacuum pump ports
50 micron air filter reduces air flow back into the chamber for purging and prevents dust and debris from entering the chamber
4.75" x 4.75" non stick silicone pad allows you to easily remove resin mixes
Max vacuum rated to 29.9inHg at sea level
Our vaccum chamber pairs perfectly with single or dual stage 3 to 9 CFM pumps
Perfect for applications like degassing urethane, silicones, epoxies, stabilize wood, extracting essential oils from organic materials, etc.
Specifications:
Maximum Rated Vacuum 29.9inHg @ sea level / 24.82 @ 5000ft
Hose Connector 1/4" SAE w/ 45ÌøåÀå_ Seat
Chamber Max Temp 160ÌøåÀå_F
Gauge Style
Gylcerin Filled
Silicone Pad Size 4-3/4" x 4-3/4"
Chamber Dimension 8.25" x 8" (Without Lid)
Overall Dimension 8" x 13-3/4"
Includes:
1 x 2 Gallon Vacuum Chamber
1 x 3/4" Acrylic Lid
1 x Heat Treated Silicone Lid Gasket
1 x Glycerin Filled Gauge with Brass Fittings
1 x 50 Micron Air Filter
1 x Non-Stick Silicone Pad
1 x 5 Foot Steel Wire Collapse-Proof Hose
1 x Instruction Manual
1 x 1/3HP 3CFM Single Stage Vacuum Pump
1 x Bonus Vacuum Oil
Free Ground